yourVINhistory

Brand VIN decoders

Mitsubishi VIN decoder: prefixes, Fuso truck codes and partial VINs

A Mitsubishi VIN does not always start with J, and the model it decodes to is sometimes a truck code rather than a car. Read the first three characters against the federal register, test the year character against the lineup, and remember that a decode is a build record with nothing in it about accidents, title brands or mileage.

Updated October 29, 2026 · Sources cited below

Have a VIN? Check that car

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.

View sample report
All-terrain tire tread with the wheel rim beside a Mitsubishi prefix codes summary panel

THE SHORT ANSWER

The first three characters of a Mitsubishi VIN name the company that filed the prefix and the country of build. NHTSA's register holds 22 prefixes across Japan, the United States, Thailand, Australia and Portugal, so a J start is common but not required. A decode confirms make, model, year, plant and body. It cannot show collisions, title brands, odometer history or theft.

Registered prefixes
22, filed by 6 companies
Countries in the register
Japan, United States, Thailand, Australia, Portugal
Truck-style model codes in 2020
21 of 28 filed names
Names filed for 2026
4, and no Mirage

Reading the first three characters of a Mitsubishi VIN

Part 565 of the federal VIN rule gives the opening three characters a specific job: together they identify the manufacturer and the type of vehicle. For Mitsubishi, NHTSA's register lists 22 prefixes, and the first character of each points to a country. The spread is wider than most printed charts admit.

Starts withCountryPrefixes in the register
JJapan15 of the 22, including JA3, JP3, JA4, JA7 and JL7
4United States4A3, 4P3 and 4A4
MThailandML3 and MP3
6Australia6MM
TPortugalTYB

A number beginning with 4, M, 6 or T can therefore still be a genuine Mitsubishi. Only the register settles it, which is why a decode against the live federal list beats a prefix chart copied from a forum thread.

The prefix names the filer, not the badge

Six legal entities hold those 22 prefixes: Mitsubishi Motors Corporation, Mitsubishi Motors North America, Mitsubishi Motors Australia, Mitsubishi Motors (Thailand), Mitsubishi Fuso Truck Europe and Mitsubishi Fuso Truck and Bus Corporation. Thailand shows how fine the split runs. ML3 is filed by the Japanese parent for Thai production, while MP3 belongs to the Thai subsidiary, so one country carries two separate filings.

A Thai prefix sits in the same federal list as the Japanese ones, so it is no warning sign on its own. The reverse surprise exists too. Two prefixes some buyers expect on Mitsubishi-built cars, JE3 and 4B3, are not on Mitsubishi's list at all. Decoded one at a time, both name FCA US LLC as the manufacturer, under a Chrysler common name, with Eagle and Dodge as the makes. If the decoder names a different company than the one you expected, trust the register and ask the seller what the car really is.

Four vehicle types sit inside those 22 rows

Each prefix carries a vehicle type in the register, and the tally explains why Mitsubishi decodes can startle people.

Vehicle type in the registerPrefixesExamples
Passenger car10JA3, 4A3, ML3, 6MM
Multipurpose passenger vehicle3JA4, 4A4, JB4
Truck5JA7, JW7, TYB
Incomplete vehicle4JL6, JLS, JL7, JW6

The same two letters can repeat. JA appears as JA3 for passenger cars, JA4 for multipurpose passenger vehicles and JA7 for trucks, which fits the rule that the first section should separate types as well as makers. The pattern is not perfectly tidy, though, because JP4 and JE4 are filed as passenger cars. Read the type from the decoder's output rather than guessing it from the third character.

Why a Mitsubishi decode can come back as a truck

In the middle years, most of what NHTSA lists under the Mitsubishi make is commercial. Model names that begin FE, FG, FH, FK or FM, FE84D among them, belong to Fuso trucks. A decode that returns one has not malfunctioned.

Model yearNames filedTruck-style codesAll other names
20001587
201021129
202028217
2024606
2026404

Between 2000 and 2020 the truck share climbs until it reaches three-quarters of the list. By 2024 the commercial names are gone from the make's list, though the Fuso prefixes remain in the register. For an older VIN, an unfamiliar model name is more likely a truck than a lookup error, so check the vehicle type field first.

Fuso chassis and the incomplete-vehicle prefixes

Four of the 22 prefixes are filed as incomplete vehicles: JL6, JLS and JL7 by Mitsubishi Fuso Truck and Bus Corporation, and JW6 by Mitsubishi Motors Corporation. An incomplete vehicle leaves its maker without a finished body, usually a chassis and cab that another company finishes as a delivery truck, a wrecker or a utility body.

Part 565 says a vehicle built in more than one stage takes its VIN from the incomplete-vehicle manufacturer, and anyone who alters it later keeps that number. So on a box truck the prefix names the chassis maker, and the firm that built the body is a separate party with its own paperwork. Ask for both sets of papers before money changes hands.

Testing the year character against the lineup

Position ten holds the model year character. On this marque it doubles as a lineup test, because the list of filed models shrank so far. For 2024 the federal list holds six names: Eclipse Cross, Low Speed Vehicle, Mirage, Mirage G4, Outlander and Outlander Sport. For 2026 it holds four, and both Mirage entries are gone.

What the test can and cannot show

The model list records what was filed with the government, not what a dealer had on the lot. A Mirage whose tenth character points to a year after 2024 is a mismatch worth resolving. It may be a misread character or a sloppy ad, so ask for the title before drawing conclusions about the seller.

Misreads are common. A VIN never uses the letters I, O or Q, so a character that looks like one of them has been read wrong. The decoder also rejects I, O, Q, U, Z and 0 in the tenth position and says so in its error text.

Decoding a partial number from a blurry photo

A listing photo with half-legible digits is not a dead end. NHTSA's decoder accepts a shortened VIN with an asterisk standing in for unknown characters, and its documentation says the ninth character, the check digit, is not required.

Partial VINModel returnedManufacturer returnedVehicle type
JA4J4UA8*OutlanderMitsubishi Motors Corporation (MMC)Multipurpose passenger vehicle
4A4AP3AU*Outlander SportMitsubishi Motors North AmericaMultipurpose passenger vehicle

The first query came back with 44 populated fields out of 154, among them engine size, drive type and airbag locations. Both carried an error code marking the VIN as incomplete, which is the useful part: the decoder shows what it matched and admits what it could not. Nothing beyond the gap comes back, so no year character, plant letter or serial. Use a partial to confirm the ad describes the right model, then read the whole number off the car.

Where to read the number on the car itself

For a car, minivan or light truck, Part 565 puts the VIN inside the passenger compartment, readable through the glass from outside near the left windshield pillar. A second copy is printed on the certification label at the driver's door opening.

Heavier chassis follow a looser rule: the number only has to appear on a part not meant to be removed, or on a permanently attached plate. On a Fuso truck, ask the seller where the plate is, then find it yourself.

Stop on a mismatch

Compare both copies with each other, with the title and with the listing, character by character. If any two disagree, pause the purchase until someone explains why, in writing if possible.

What a decode answers and what it leaves blank

People say VIN check for two different things, and a decoder does only one of them. It reads what the manufacturer encoded and filed. It has no view of what happened to the car afterward.

What you want to knowDoes a decode cover it?
How the factory built the carYes: maker, model, year, body style, engine, assembly plant
Who filed the prefixYes: that is what the register records
Open safety recallsYes, by VIN match in NHTSA's lookup
A past collisionNo
A branded titleNo
A rolled-back odometerNo
A theft reportNo

Those gaps live in other records. A yourvinhistory report reads them by VIN, covering title brands, accidents with a damage map, odometer readings and theft, so it is the natural next step once the decode checks out.

Open recalls on a used Mitsubishi

Of everything a decode touches, the recall result carries the most money. NHTSA's lookup is free and matches campaigns to the full VIN, so run it before you discuss price and again on the day you sign, since new campaigns get added.

Federal law requires manufacturers to fix recalls at no charge, with an age cutoff: the rule stops applying when the first buyer bought the vehicle more than 15 calendar years before the manufacturer's notice or a government order, whichever came first. The number of owners in between does not matter, but the age does. Past the cutoff the maker is not obliged to repair for nothing, so confirm what it will do for this campaign on this vehicle before treating the repair as costless.

A sensible order for checking a used Mitsubishi

  1. Read the VIN off the windshield plate and the door label, and confirm both match the title.
  2. Decode the full number and look at the filer, the country and the vehicle type. A surprise is information, not an error.
  3. Compare the model and year with the lineup. A nameplate that did not exist that year needs an explanation.
  4. Run the NHTSA recall lookup before you talk price, and write down any open campaign numbers.
  5. On a truck, ask who built the body and get that company's paperwork alongside the chassis papers.
  6. Pull a history report last, because the decode cannot see collisions, brands or mileage.

Where this information comes from

Sources and photos: Facts checked against the sources above in October 2026. Photo by Rob Wingate on Unsplash; diagrams by YourVINHistory.

Keep reading

Frequently asked questions

How do I decode a Mitsubishi VIN?

Enter all 17 characters into NHTSA's decoder or a tool built on it, then read four fields: manufacturer, make, model and vehicle type. Positions ten and eleven give the model year and the assembly plant, and position nine is the check digit. If the result carries an error code, read its text, because it names the positions the decoder doubted.

Does every Mitsubishi VIN start with J?

No. Fifteen of the 22 registered prefixes begin with J for Japan, but the register also holds three starting with 4, two with M, and one each with 6 and T. A car with an ML or MP start was built in Thailand. Treat the first character as a clue to the country of build and compare it with what the seller says.

What does it mean when a Mitsubishi VIN decodes to FE84D?

The number belongs to the Fuso truck side of the name, so the decode is working. Confirm with the vehicle type field, which reads truck or incomplete vehicle. If the ad promised a car, one of the two documents is wrong, and the VIN on the vehicle outranks the ad. If it is a chassis cab, also ask who built the body.

Can a VIN decoder show whether a Mitsubishi was in an accident?

No. A decode reports how the factory built the vehicle, not what happened afterward. Collisions, title brands, odometer readings and theft entries sit in separate record systems, so they take a different search. A clean-looking decode says nothing about whether the car was wrecked, flooded or rolled back.

Does a valid check digit prove a Mitsubishi VIN is genuine?

No. Part 565 defines the check digit as a way to verify that the number was transcribed correctly, so it catches typos and most invented numbers. A real number copied onto another vehicle still passes. What exposes a swap is a mismatch between the plate on the dash, the door label and the title.

Now check the car itself

The guide explains what to look for. The report shows what this VIN has on record.

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.