
THE SHORT ANSWER
Read a VIN left to right. Position 1 is the country of assembly, positions 2 and 3 name the maker and vehicle type, and positions 4 to 8 are the manufacturer's own description of the model, body and engine. Position 9 is a check digit, position 10 is the model year, position 11 is the assembly plant, and positions 12 to 17 are the serial number. The letters I, O and Q never appear.
- Length
- 17 characters since the 1981 model year
- Model year
- Position 10, as a letter or digit code
- Check digit
- Position 9, tested against the other 16
- Never used
- The letters I, O and Q
How the 17 characters are grouped
Federal rule 49 CFR 565.15 divides a VIN into four sections: positions 1 to 3, positions 4 to 8, position 9 alone, and positions 10 to 17. Many guides teach three blocks instead, joining the check digit to the last group. The lines differ but each position means the same either way, so two sources that group them differently do not contradict each other.
| Position | What it holds |
|---|---|
| 1 | Country where the vehicle was assembled |
| 2 and 3 | Maker, then vehicle type or division |
| 4 to 8 | The manufacturer's description of the vehicle |
| 9 | A check digit that tests the other sixteen |
| 10 | Model year code |
| 11 | Assembly plant |
| 12 to 17 | Serial number |
This layout has applied since the 1981 model year. Earlier vehicles carry numbers each maker designed for itself.
Positions 1 to 3: country, maker and vehicle type
The first character is a country code. It records where the vehicle was assembled, not where the brand is based: a Japanese-brand pickup built in Mexico starts with 3, not J.
| Country | First character |
|---|---|
| Canada | 2 |
| China | L |
| Germany | W |
| Italy | Z |
| Japan | J |
| Korea | K |
| Mexico | 3 |
| Sweden or Finland | Y |
| United Kingdom | S |
| United States | 1, 4 or 5 |
Characters 2 and 3 complete the world manufacturer identifier, which is assigned internationally so one code points to one maker in every country. The second character points to the manufacturer and the third to the vehicle type or division.
One brand can hold several codes, and luxury divisions often have codes of their own even when they share a platform with a parent brand.
When the badge and the VIN disagree
An emblem can be swapped in a minute, while the maker code is set at the factory. If the badge and the VIN name different divisions, the car may have been rebadged, and the seller owes you an explanation.
Positions 4 to 8: the part each manufacturer writes itself
These five characters carry the manufacturer's description of the vehicle: which model line, body style and engine it has, and which restraint system. No shared standard assigns meanings to them. Each manufacturer sets its own scheme and may rewrite it when a generation changes.
So a letter in position 8 can stand for one engine on one make and a different engine on another, or on the same make a decade apart. If a decode names an engine the car does not have, recheck the model year first.
Why a printed chart can mislead
NHTSA's decoder reads the patterns manufacturers file for each model year. A generic chart has no filing behind it, so treat any engine or body code taken from one as a guess.
Position 9: how the check digit is built
The ninth character is not a description. It is the answer to a sum run on the other sixteen characters, which is why it can expose a VIN that was copied wrongly.
- Turn every character except the ninth into a number. Digits keep their face value; letters take a value from the federal table below.
- Multiply each number by the weight for its position: 8, 7, 6, 5, 4, 3, 2 and 10 for positions 1 to 8, then 9, 8, 7, 6, 5, 4, 3 and 2 for positions 10 to 17.
- Add the products and divide the total by 11.
- The remainder is the check digit. A remainder of ten is written as X, since only one character fits.
- A to H take the values 1 to 8, in order
- J to N take the values 1 to 5, in order
- P is 7 and R is 9
- S to Z take the values 2 to 9, in order
A failed sum almost always means a misread or mistyped VIN, which is worth knowing before you act on anything else the decode says.
A check digit worked by hand
Here is an invented VIN, 1AKAS2CA1SA000006, which belongs to no real vehicle. Position 9 is set aside, every other character becomes a value, and each value is multiplied by the weight for its position.
| Position | Character | Value × weight | Product |
|---|---|---|---|
| 1 | 1 | 1 × 8 | 8 |
| 2 | A | 1 × 7 | 7 |
| 3 | K | 2 × 6 | 12 |
| 4 | A | 1 × 5 | 5 |
| 5 | S | 2 × 4 | 8 |
| 6 | 2 | 2 × 3 | 6 |
| 7 | C | 3 × 2 | 6 |
| 8 | A | 1 × 10 | 10 |
| 9 | 1 | not counted | 0 |
| 10 | S | 2 × 9 | 18 |
| 11 | A | 1 × 8 | 8 |
| 12 to 16 | 0 0 0 0 0 | 0 | 0 |
| 17 | 6 | 6 × 2 | 12 |
The products add up to 100. Eleven goes into 100 nine times with 1 left over, so the check digit has to be 1, and it is. Change one character to something with a different value and the remainder shifts, which is why a single slip almost always shows.
Position 10: the model year code and its chart
The tenth character is a model year code on a 30-year cycle. Digits 1 to 9 stood for 2001 through 2009, and letters start at A for 2010. The cycle before that also began with A, at 1980, and ended with Y at 2000. I, O, Q, U and Z are left out, so the sequence jumps from H to J, N to P, P to R and T to V.
| Code | Year | Code | Year | Code | Year |
|---|---|---|---|---|---|
| A | 2010 | H | 2017 | R | 2024 |
| B | 2011 | J | 2018 | S | 2025 |
| C | 2012 | K | 2019 | T | 2026 |
| D | 2013 | L | 2020 | V | 2027 |
| E | 2014 | M | 2021 | W | 2028 |
| F | 2015 | N | 2022 | X | 2029 |
| G | 2016 | P | 2023 | Y | 2030 |
A letter alone fits more than one decade. On passenger cars and the lighter trucks and multipurpose passenger vehicles, position 7 settles it: a letter there means the code in position 10 belongs to 2010 or later, and a digit means 1980 through 2009. In the invented VIN above, position 7 is C and position 10 is S, so the year reads 2025.
Positions 11 to 17: the plant and the serial
Position 11 names the assembly plant, using a code the manufacturer defines. Plants open, close and change products, so codes get reassigned over the decades and a table found online is a poor guide. The code matters for recalls, because a campaign is often limited to one plant and a span of dates.
Positions 12 to 17 are the production sequence, a count of vehicles built at that plant. On ordinary cars the number only makes the VIN unique. A low serial, or one inside a known run, can mark an early car or a batch collectors follow.
Low-volume manufacturers differ. Under 49 CFR 565.15 they combine positions 12 to 14 with positions 1 to 3 to identify the maker and vehicle type, which shortens the serial.
Letters that never appear, and what to try when a VIN fails
The letters I, O and Q are never used in a VIN, because they are easily mistaken for the digits 1 and 0. On a worn plate, a character that looks like an O is a zero and one that looks like an I is a one. U and Z are allowed, but not in the model year position.
When a VIN you typed fails the check digit, work through these in order.
- Look for a letter that should be a digit, such as O for 0 or I for 1. Neither letter can be in a real VIN.
- Recopy from a photograph of the plate instead of by hand. People slip when copying 17 characters through glass.
- If the number came from a seller and still will not validate, compare it with the plate on the vehicle.
A one-minute read before you pay
Reading a VIN pays off most as a comparison between the number, the car and the paperwork. Four quick tests cover it.
- Position 1 against where the vehicle is said to have been built.
- The maker code against the badge on the car.
- Position 10 against the model year on the title and in the listing.
- The check digit, worked as above or tested by a decoder.
A mismatch is not proof of anything sinister. It is a question for the seller, and a reason to hold the payment until the answer fits.
What is not in a VIN at all
A VIN describes the vehicle as it left the factory. It does not record what happened afterward.
- Paint color, which sits on a separate label
- Trim name: the descriptor may narrow it, but marketing names never appear
- Owner details, which stay with state agencies
- Mileage, accidents, title brands and service visits
- Options or modifications added after the factory
Those facts live in records filed against the VIN. NHTSA's recall lookup answers the open recall question, and NICB's VINCheck screens for theft and salvage records from participating insurers. For title brands, accidents, salvage auction photos and odometer readings you need a vehicle history report; the one on this site starts with a free preview and is a one-time purchase after that.
Where this information comes from
- NHTSA: vPIC VIN decoder — The federal decoder. It works from VIN patterns that manufacturers submit under the federal VIN standard and is intended for model year 1981 and later.
- NHTSA: Recalls lookup — Search open safety recalls by VIN at no charge; the manufacturer fixes a recall repair without cost to the owner.
- NICB: VINCheck — A no-cost theft and salvage screen built on records from participating insurers, one of the questions a VIN decode cannot answer.
Sources and photos: Facts checked against the sources above in October 2026. Photo by Justin Cron on Unsplash; diagrams by YourVINHistory.
Keep reading
- Where is the VIN number?You need the number in hand first, and this lists where to find it on the vehicle and on paperwork.
- NHTSA VIN decoderRun the characters through the federal decoder and see what it returns for each position.
- Paint code by VINPaint color is the item people most expect to find in a VIN, and this shows where it actually sits.
- Vehicle history reportWhat a VIN decode leaves out, such as brands and accidents, lives in a history report.
Frequently asked questions
Is the year in a VIN the year the car was built?
Not always. Position 10 gives the model year, and a maker can begin building next year's model before the calendar turns, so a car coded for one year may have been assembled in the year before. The certification label in the driver's door jamb shows the month and year of manufacture, which is the date a recall notice's build range refers to.
Why is there an X in my VIN?
In the ninth position, X is how the check digit writes a remainder of ten, because one digit cannot hold it. Elsewhere in the VIN, X is an ordinary letter worth 7 in the arithmetic, and in the tenth position it stands for 2029. An X alone is no sign of a problem.
If a VIN passes the check digit test, is it genuine?
No. The test only shows that the ninth character agrees with the other sixteen. Anyone can calculate a matching digit for an invented number, and a VIN copied from a real car passes too. A valid check digit rules out a typo; matching the VIN to the plate and the title is what ties it to the car.
Why does the same engine letter mean different engines on different cars?
Positions 4 to 8 have no shared meaning. Each manufacturer files its own pattern for every model year and may reuse a letter for a different engine in a later generation. An engine code means something only alongside the make, model and year, checked against that filing rather than a generic chart.
Can I read the VIN on a car built before 1981?
Not with the scheme on this page. Before the 1981 model year, makers used numbers of their own design, often shorter, with no check digit and no fixed spot for the year. NHTSA's decoder is intended for 1981 and later, so older cars are identified from factory tags, build records and marque registries.
Now check the car itself
The guide explains what to look for. The report shows what this VIN has on record.