
THE SHORT ANSWER
The NHTSA VIN decoder is the agency's public lookup, called vPIC, and it needs no account or key. It returns what the manufacturer filed: make, model, year, body, engine, plant and safety equipment. Each answer carries a result code, and 0 means the number was recognized with a valid check digit. It never shows accidents, title brands, odometer readings, theft or owners. Those records sit in state, insurer and NMVTIS systems.
- Cost
- No account, card or key needed
- Result codes
- 15 in the catalog, numbered 0 to 12, then 14 and 400
- Response size
- 154 keys in the flat single-VIN answer
- Not included
- Accidents, title brands, odometer, theft, owners
What the agency's decoder actually is
The decoder is one front end to vPIC, the Product Information Catalog Vehicle Listing, which the National Highway Traffic Safety Administration runs. You can type a number into a web form, or a program can call the same system and receive XML, CSV or JSON. Queries for this guide went through with no key and no login.
Behind it sits a pile of manufacturer filings. Under 49 CFR Part 565, the federal rule on VIN requirements, a maker reports how it assigns the characters in its numbers, and vPIC is built from those submissions. Decoding is a matching job against those filings. Many free decoder sites query this same service, so a different logo does not always mean a different source.
Entering the number: full, partial, with a model year
Use all 17 characters and copy them from the car itself: the plate at the base of the windshield or the label on the door opening. Numbers typed from listings or texts are where most errors begin.
The agency's documentation suggests adding the model year when you know it, and it accepts a star for an unknown character. The star has limits. In a test with a recent Chevrolet sedan, a pattern with a star where the check digit belongs came back as code 6, incomplete, yet still named the make, model and year. A number cut off after seven characters named the make and model but left the year blank, since the year sits in the tenth position.
What comes back, and why so many fields are blank
The flat-format answer for a single VIN holds 154 keys. A few are bookkeeping, such as the error code and a suggested corrected VIN. The rest draw on well over a hundred defined vehicle variables, in a handful of families.
- Identity: make, model, model year, trim and manufacturer
- Body and engine: body class, doors, cylinders, displacement, fuel type, turbocharging
- Plant: city, state and country of assembly
- Weight: gross vehicle weight rating class and sometimes curb weight
- Safety equipment: antilock brakes, stability control, tire pressure monitoring, airbag locations, driver-assist features
Do not read a blank as a missing feature. A slot fills only when the manufacturer filed that detail for that exact build. In a sample decode of a recent sedan, fewer than half of the 154 keys held a value. Blank means unfiled, which is a different statement from absent.
The fifteen result codes, sorted by what they are about
The agency publishes the list through the same interface, under a variable named Error Code. The codes run from 0 to 12, then 14 and 400, with no 13. Sorted by subject, they form seven groups, and only the last concerns the vehicle rather than your typing.
| Codes | Subject | What the decoder is saying |
|---|---|---|
| 0 | Clean decode | Recognized, and the check digit works out. |
| 1 | Check digit | The ninth character fails the arithmetic, so something was probably mistyped. |
| 2, 3, 4, 5 | Repairs | One position was fixed (2 and 3), fixed with several candidate matches (4), or errors sit in more than one place (5). |
| 6, 400 | Shape | Too short (6), or a character that cannot appear in a VIN (400). |
| 11, 12 | Model year | The tenth character is not a valid year code (11), or the year you supplied disagrees with it (12). |
| 8, 14 | Gaps | No detailed data yet (8), or the filing left some characters uncovered (14). |
| 7, 9, 10 | The vehicle | Maker not registered for U.S. road use (7), a glider (9), an off-road product (10). |
Several codes can arrive together. The error field then holds them as a comma-separated string.
What happens when a good VIN gets damaged
A test for this guide took one valid number for a recent Chevrolet sedan and broke it the ways a typo or a blurry photo would.
| What was changed | Codes returned | What still came back |
|---|---|---|
| Nothing | 0 | The full build |
| Check digit swapped for another digit | 1 | The full build, including the year |
| Letter O typed in the serial | 1 and 400 | The build, plus a suggested VIN with an exclamation mark where the O sat |
| Z in the year position | 1, 11 and 400 | Make and model, year left blank |
| Cut off after seven characters | 6 and 11 | Make and model, no year |
| Last two serial digits dropped | 6 | The full build |
Damage seldom stops the decoder from naming the car, so a make and model beside a non-zero code is a lead, not a confirmation. Combinations carry information too: a lone 6 points at a short number, while a 1 paired with 400 points at a character that should not be there.
What to do about each kind of typing error
- Code 1: reread the number off the vehicle, character by character. A copying slip is far likelier than a problem with the car. If a number read straight from the car still fails, take that to the seller first.
- Codes 2 to 5: treat the suggested VIN as a lead. An exclamation mark flags the position the decoder doubts. Compare it with the car.
- Codes 11 and 12: look at the tenth character, which is never I, O, Q, U, Z or 0. For code 12, compare the advertised year with the year the VIN encodes.
- Code 400: hunt for a letter that resembles a digit, usually an O where a zero belongs.
- Codes 6, 8 and 14: enter the full number first. If little comes back, the vehicle may predate the system the catalog was built around, or its maker filed few details.
Codes 7, 9 and 10: when the warning is about the car
These three say something about the object the number was stamped on, and they deserve a pause before money changes hands. None of them means the vehicle is stolen or fraudulent.
- Code 7: the manufacturer is not registered with the agency for sale or import on U.S. roads. Innocent explanations are common, such as a vehicle older than the modern VIN system or one built for another market. On a car sold as an ordinary U.S. model, ask the seller.
- Code 9: the glider warning. A glider is a new body and chassis fitted around a used powertrain. The agency's wording places it outside the statutory definition of a motor vehicle, citing 49 U.S.C. 30102(a)(6), so it cannot carry a VIN meeting Part 565. A seller pitching a new truck that decodes this way has a contradiction to explain.
- Code 10: the off-road warning. The number resembles a VIN, yet the maker never certified the machine as meeting the federal safety rules for road vehicles. Side-by-sides and utility vehicles are the usual cases. Nothing is defective, but it was not built for public roads, and that affects registration.
The limit: a decode says nothing about the car's past
The catalog describes how a manufacturer built a vehicle and stops there by design. Every decode, including a perfect code 0, leaves out the following.
- Accidents and damage
- Title brands such as salvage, flood, rebuilt or lemon
- Odometer readings
- Theft and recovery records
- Past and present owners
- Market value
Those records come from state title agencies, insurers, salvage yards and auctions. The federal title database, NMVTIS, gathers part of it through approved data providers. A code 0 vouches only that the number hangs together and the catalog knows it. The car itself is another matter.
Where a history report fits
A yourvinhistory report covers the other half: title brands, accidents with a damage map, odometer readings, salvage and auction records, liens and theft. Its NMVTIS title records come from ClearVin LLC, an approved NMVTIS data provider. The preview is free and the full report is a one-time purchase.
The rest of the interface: questions beyond one VIN
| Lookup | What it answers |
|---|---|
| Decode a single VIN | Fields for one number, the lookup behind most free decoders |
| Decode a manufacturer prefix | Who holds the first three characters, for which vehicle type |
| Models for a make and year | Which models a brand filed in a given model year |
| Identifiers for a manufacturer | The prefixes a company has on file |
| All makes | The roster of makes in the catalog |
| Variable values | Permitted values for a field, including every result code above |
In a test, the prefix lookup for that Chevrolet VIN's first three characters returned General Motors and passenger car. A model list for a make and year checks that a nameplate existed when an advertisement says it did. The catalog holds more than twelve thousand makes, so a printed chart of brand codes covers only a small slice.
A short routine before you rely on a decode
- Copy the VIN from the car, from the windshield plate and the door label, and confirm the two match.
- Decode the full number, adding the model year if you know it.
- Read the result code before any field. Anything other than 0 changes how much weight the fields carry.
- Compare make, model, engine and assembly plant with the listing, and treat blank fields as unfiled rather than missing.
- Run the agency's separate recall lookup by VIN, since the decoder does not report recalls.
- Then check title, accident and odometer history, which a decode cannot see, before negotiating.
Where this information comes from
- NHTSA: vPIC API documentation — Describes the service, its response formats, the decode and lookup actions, and the manufacturer filings behind the data.
- NHTSA vPIC: Error Code values — The agency's own list of result codes, from 0 through 12, then 14 and 400.
- NHTSA vPIC: vehicle variable list — The catalog of defined fields that a decode can fill.
- eCFR: 49 CFR Part 565, Vehicle identification number requirements — The federal rule that manufacturer VIN filings are made under and that the glider warning cites.
Sources and photos: Facts checked against the sources above in October 2026. Photo by Alejandro Escamilla on Unsplash; diagrams by YourVINHistory.
Keep reading
- How to read a VINExplains what each VIN position means and the check digit math behind codes 1 to 5.
- Car specs by VINExplains which specifications a decode fills in and which stay empty.
- NMVTIS reportCovers the federal title records that a factory-build decode cannot supply.
- Recall check by VINShows how to check open recalls, which the decoder leaves out.
Frequently asked questions
Is the NHTSA VIN decoder free?
Yes. The agency lets anyone use the web decoder and the programmatic interface without an account or payment, and the data is a public record. That is why paid and unpaid sites alike can show the same make, model and engine. What a vendor charges for is the history assembled from other sources.
What does a result code of 0 tell you about a VIN?
A 0 means the VIN decoded cleanly and its ninth-position check digit calculates correctly. It describes the number, not the vehicle. A flood car, a stolen car and a spotless car all decode to 0 if their numbers are intact, so treat it as permission to read the fields, not as a verdict on the car.
Why does a VIN decode show blank fields?
A field fills only when the manufacturer submitted that detail for the model, and makers file very different amounts of it. Fields built for buses, trailers or motorcycles read Not Applicable on a car, which is normal. A blank is a prompt to check the window sticker or owner's manual, not proof that a feature is missing.
Does the NHTSA decoder show recalls, accidents or title history?
It shows none of the three. The decoder reports the factory build. Open recalls are searched in a separate agency tool that you should also run by VIN. Accidents, title brands and odometer records live in state, insurer and NMVTIS systems, so a decode and a history report answer different questions.
Why does the decoder show a different model year than the listing?
Either the listing or the VIN was copied wrong, or the seller is quoting a different year than the one the manufacturer encoded in the tenth position. If you supplied a year yourself and it disagrees, the decoder returns code 12. Re-read the tenth character on the car, then ask the seller to explain any gap.
Now check the car itself
The guide explains what to look for. The report shows what this VIN has on record.