
THE SHORT ANSWER
The first three characters of a Peterbilt VIN identify the manufacturer. Three of them, 1XP, 2XP and 3WP, are filed with NHTSA under the truck type. The other three, 1NP, 2NP and 3BP, are filed as incomplete vehicles. A truck code means Peterbilt certified a finished vehicle. An incomplete code means it supplied a chassis and a body builder certified the finished truck. NHTSA's vPIC decoder shows which category a given VIN falls in.
- Registered codes
- Six, all under Peterbilt Motors Company
- Truck codes
- 1XP, 2XP, 3WP
- Incomplete-vehicle codes
- 1NP, 2NP, 3BP
- Federal decoder
- NHTSA vPIC, public, no charge
The six Peterbilt codes and what separates them
NHTSA's register holds six manufacturer identifiers for Peterbilt Motors Company. They form three matched pairs, and the first character of each code marks the country of manufacture: 1 for the United States, 2 for Canada, 3 for Mexico.
| Code | Country | NHTSA vehicle type |
|---|---|---|
| 1XP | United States | Truck |
| 1NP | United States | Incomplete vehicle |
| 2XP | Canada | Truck |
| 2NP | Canada | Incomplete vehicle |
| 3WP | Mexico | Truck |
| 3BP | Mexico | Incomplete vehicle |
Inside a pair, only the second character changes: X becomes N for the American and Canadian codes, and W becomes B for the Mexican pair. On the page it looks like a minor difference, and it is not cosmetic. It separates a vehicle Peterbilt certified as finished from one it did not.
Complete or incomplete: who certified the truck
A federal safety certification is a statement that a finished vehicle meets the standards that apply to it. A truck under 1XP, 2XP or 3WP carries that statement from Peterbilt. A chassis under 1NP, 2NP or 3BP does not, because it left the plant without a body and there was nothing finished to certify.
That responsibility passes to whichever company completes the vehicle. Peterbilt ships the chassis with a document describing what the frame is built to support, and the finished truck is certified by the builder. Occasionally the chassis maker agrees to take on full responsibility itself, and then its own name appears on the final label.
None of this makes an incomplete code a defect. It records where the factory's job stopped.
What the chassis maker's paperwork has to contain
Federal rules require the maker of an incomplete vehicle to supply a document with it, either attached so it cannot come loose by accident or sent straight to the next company in the chain. For a Peterbilt chassis, expect these entries:
- The maker's name and mailing address
- The month and year of its last manufacturing operation on the vehicle
- The VIN, or group of VINs, the document applies to
- The gross vehicle weight rating intended for the completed vehicle, and the gross axle weight rating for each axle from front to rear
- The vehicle types the chassis may become
- For each applicable safety standard, whether the vehicle conforms as supplied, conforms under stated conditions, or cannot be judged from what the maker provided
The last entry matters most. It tells the next company which standards it still has to satisfy before it can certify the finished truck.
The second label, and which weight ratings win
A body builder that completes the vehicle becomes the final-stage manufacturer. It must apply its own certification label without covering the earlier ones. That label shows the builder's name, the month and year the work ended, the weight ratings for the truck as it now exists, and the VIN.
Where the two sets of figures disagree, the final label governs. The chassis document describes a bare frame. The label describes the truck in front of you, and a buyer who quotes the chassis figure is quoting a number for something that no longer exists on its own. To collect both:
- Walk to the driver's side and find the number on the frame rail.
- Open the driver's door and read the certification label in the door area.
- Look nearby for a second label, often from a company you do not recognize.
- Photograph every label close enough to read before you leave.
Why work trucks so often carry the incomplete codes
A sleeper tractor is a finished vehicle on the day it is built, so long-haul units mostly carry the truck codes. Vocational trucks work the other way around, because the equipment that defines the job comes from other companies. Specialist shops bolt on the dump bed, the concrete drum, the tank, the crane, the wrecker bed, the garbage packer or the utility body, using chassis bought from truck makers.
A workable rule for shoppers: a highway tractor probably left complete, while a truck built to haul loose material, lift, pump or collect waste probably started as 1NP, 2NP or 3BP. The name on the body may be a firm you have never heard of. That firm, not Peterbilt, answers for the body and holds its paperwork.
Decoding the number through NHTSA's public tool
NHTSA runs a public decoder called vPIC. Type in the 17 characters and the answer lists the make, the model, the year, a body class and a weight class, with no account and no charge. Its page also says partial VINs are accepted. The vehicle type field is the fastest way to see which side of the split you are on: a 1XP number reads as a truck, a 1NP number reads as an incomplete vehicle.
A decode describes the chassis
The result reflects how the factory specified the frame it built. It does not describe a body, a crane, a tank or anything else added afterward, and the data comes from what manufacturers report to NHTSA.
Trucks from before the 17-character era will not decode here, and an odd result on a modern one is a reason to look at the physical labels again.
Recalls come from two manufacturers, not one
Each company files campaigns separately. Steering, braking and other chassis defects come from Peterbilt. Hydraulics, booms, hoists and mounting hardware come from whoever built the equipment.
NHTSA's recall lookup runs on the chassis VIN, so it covers the first category. A body builder's campaign may not show up in that search at all. For that half, find the serial plate on the body, contact the builder, and ask about open campaigns on that serial. Doing only the federal check on a working truck answers half the question.
Once the finished truck runs in commerce, the regulations of the Federal Motor Carrier Safety Administration also apply to how it is operated. That is separate from recalls, but it is worth asking the seller whether the truck has been used that way.
Questions for the seller of a body-fitted Peterbilt
Decode before you drive out to see it. A 1NP, 2NP or 3BP number tells you ahead of time that two manufacturers are involved and that the inspection should cover both halves of the truck.
- Which company completed the vehicle, and can I read its certification label?
- Is the chassis document from Peterbilt still with the truck?
- Do you have manuals, service records or warranty papers for the body and its equipment?
- Has the body builder ever issued a recall or service notice on this unit?
A common gap is a seller who can produce the truck's papers but not one page for the body, which is often the more expensive component to repair or replace.
What the number cannot tell you
A decode reports the chassis as specified at the factory. It says nothing of crashes, branded titles, loans against the truck or odometer readings, or of how hard the truck was worked. Heavy trucks above a federal weight rating are exempt from odometer disclosure, so a mileage figure may never have been stated at any sale.
Other free tools fill some gaps. NICB's VINCheck screens for theft and salvage records, while the national title database, NMVTIS, is searched for you by approved providers. A yourvinhistory report combines title records supplied by ClearVin LLC, an approved NMVTIS provider, with accident, salvage, auction and recall records where they exist for the VIN. The preview is free and the full report is a one-time purchase.
Where this information comes from
- NHTSA: vPIC VIN decoder — Public register of the six Peterbilt codes and their truck or incomplete-vehicle classes, and the tool that decodes a VIN.
- NHTSA: Recalls — The federal VIN-based recall search, which covers the chassis number.
- FMCSA: Federal Motor Carrier Safety Administration — Commercial vehicle rules that apply once a finished truck is operated in commerce.
- eCFR: Part 568, vehicles manufactured in two or more stages — Sets out the incomplete vehicle document and the duties of the companies that finish a chassis.
- eCFR: Part 567, certification labels — Lists what the final-stage manufacturer's label must show, including the weight ratings and VIN.
Sources and photos: Facts checked against the sources above in October 2026. Photo by Ümit Yıldırım on Unsplash; diagrams by YourVINHistory.
Keep reading
- Semi trucksThe commercial basics: a single tractor can carry several separate serial numbers.
- KenworthSame chassis-versus-finished-truck question, applied to Peterbilt's sister marque.
- NHTSA VIN decoderWhat the federal decoder returns, and where its data stops.
- Buying a used box truckA body fitted to a bought-in chassis, with the weight cutoff that decides which rules apply.
Frequently asked questions
What do 1XP and 1NP mean on a Peterbilt VIN?
Both are manufacturer codes for trucks built in the United States. 1XP is registered as a truck that Peterbilt certified as finished. 1NP is registered as an incomplete vehicle, meaning Peterbilt built a chassis for another company to finish. The codes say nothing about model or year, which come from later characters in the number.
Can I decode a Peterbilt VIN for free?
The federal route costs nothing. NHTSA's vPIC decoder is public, and it reports the make, model, year, body class and weight class tied to the number you enter. Check the vehicle type line in the result, since it states whether the number belongs to a truck or an incomplete vehicle. Anything about the body or its equipment has to come from the body builder.
Is an incomplete vehicle code a warning sign?
No. It only means the vehicle was not finished at the Peterbilt plant. Dump trucks, mixers and tankers commonly start that way. The real risk is thin paperwork: if the seller cannot show the chassis document and the body builder's label, you cannot confirm who certified the truck or what it was rated to carry.
Which weight rating should I trust on a Peterbilt with a body?
Trust the label applied by the company that finished the truck. The chassis document states the ratings Peterbilt designed the frame for, while the final label states the ratings for the vehicle as completed. If the two differ, the final label is the figure that describes the truck you would be driving.
Does a Peterbilt VIN show mileage or accident history?
No. The number identifies the chassis and nothing that happened afterward. Because heavy trucks over a federal weight rating are exempt from odometer disclosure, the mileage on a Peterbilt may never have been written down at a sale. Ask for service and maintenance records, and compare what they say with the wear you can see.
Now check the car itself
The guide explains what to look for. The report shows what this VIN has on record.