yourVINhistory

Repair costs

Chevy Traverse timing chain replacement cost, tested against GM's own hours

RepairPal prices a timing chain and gear set at $2,701 to $3,541 on a 2019 Chevy Traverse, yet the older SUVs with the chain trouble are better judged by the labor hours GM itself assigns. This guide sets those hours beside the published ranges, GM's bulletins and the federal complaint record, so you can test a quote before approving it.

Updated October 30, 2026 · Sources cited below

Have a VIN? Check that car

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.

View sample report
Engine bay of an SUV beside a panel listing three timing chain quote checks

THE SHORT ANSWER

RepairPal lists $2,701 to $3,541 for a 2019 Traverse timing chain and gear set, but its pages describe 2018 and newer cars. For a 2009 to 2012 Traverse, GM's bulletin books 9.5 labor hours on front-wheel drive and 9.7 on all-wheel drive, so multiply by the shop's rate and add the kit and fluids. GM's special coverage for certain 2009 cars has expired, and no recall names the chain.

RepairPal range
$2,701 to $3,541, 2019 chain and gear set
GM labor hours
9.5 front-wheel drive, 9.7 all-wheel drive
Bulletin years
2009 to 2012, 3.6L LLT V6
Special coverage 11340C
Expired: 10 years or 120,000 miles

What a fair Traverse chain quote is made of

On this V6 the labor, not the part, drives the bill. Reaching the timing cover means lowering the frame, draining coolant and recovering the air conditioning charge first. GM's own procedure notes that no alignment follows, since the frame only comes down and goes back up.

  • One GM chain package
  • Engine oil and a filter
  • Coolant
  • RTV sealant
  • A/C refrigerant
  • Power steering and transmission fluid

A sound quote reads as hours times the shop's posted rate, plus the kit, plus those fluids. A total far above that sum needs an explanation.

The hours GM assigns to the job

When GM pays a dealer for a covered repair, it books a fixed number of labor hours. A retail shop owes nobody those figures, but they show how long the manufacturer expects the work to take. The bulletin's times apply to repairs under the 5-year, 100,000-mile powertrain warranty.

GM documentJobFront-wheel driveAll-wheel drive
Special coverage 11340C, certain 2009 carsReplace chain, A/C and fluid refills included9.0 hours9.2 hours
Bulletin 12-06-01-009E, 2009 to 2012Install chain kit9.5 hours9.7 hours
Same bulletinAdd camshaft thrust washers+0.5 hour+0.5 hour
Same bulletinAdd oil life monitor calibration+0.4 hour+0.4 hour

Published dollar ranges, and which cars they describe

RepairPal is the only outlet whose figures for this job could be read, and each range below is its estimate, retrieved in October 2026, not a measurement made here.

RepairPal pageJob pricedPublished range
2019 Traverse repair costsTiming chain and gear set$2,701 to $3,541
2018 Traverse repair costsTiming chain tensioner$2,541 to $3,464
2023 tensioner estimator, updated September 3, 2026Tensioner; labor $2,342 to $3,437, parts $628 to $663$2,970 to $4,100

All three describe Traverses from 2018 onward, and two price a tensioner, not a chain set. No RepairPal chain estimate for a 2009 to 2017 Traverse could be read, though that is the generation GM's paperwork is about. For those cars, lean on the hours above.

Which years the paperwork covers, and the engine in each

GM's chain bulletin lists the 2009 to 2012 Traverse with the 3.6L V6 coded LLT. NHTSA's vPIC decoder reads the VIN patterns of 2013, 2015 and 2017 Traverses as LLT too, so the engine lasted to the end of the first generation. The 2018 redesign made the 3.6L LFY V6 standard, with a 2.0L turbo four on the front-drive RS.

Model yearsEngineGM chain paperwork found
2009LLTCoverage 11340C (expired) and the bulletin
2010 to 2012LLTBulletin only
2013 to 2017LLTNone; the bulletin's list stops at 2012
2018 and newerLFY, or 2.0L turbo on the RSNo chain bulletin or coverage found

The cause GM put in writing

GM's special coverage bulletin is pointed about cause: driving conditions, combined with a car's original oil change schedule, could wear the chain early and light the Service Engine Soon lamp. The owner letter adds that the age of the oil can play a part.

Software came first. Customer Satisfaction Program 10287 reflashed the engine computer and ran until October 31, 2012. GM's letter then concedes the reflash may not fully correct every vehicle, so the special coverage followed. Bulletin 12-06-01-009E later added an oil life calibration update to the chain job.

A new chain meets the same cause

A replacement chain on an LLT wears under the conditions that worried GM originally. If the car never received the oil life calibration, or the owner stretches oil changes, the new part inherits the exposure. Have the dealer look up the VIN for a completed calibration and apply it while the chain is out.

Parts GM says get replaced without need

Bulletin 12-06-01-009 is informational. It instructs technicians, creates no coverage program and pays only while a car is under warranty. It applies to the 2009 to 2012 LLT Traverse when the engine stores P0008, P0009 and P0016 through P0019.

The kit leaves out the RTV sealant and the chain guides, and GM says outright that idler sprockets, camshaft actuators, the crankshaft gear and the guides are being swapped though they are not worn. Guides qualify only where the wear block has ground down to the base friction material. Cars built before June 5, 2009 get a further check of the camshaft thrust washers.

A quote that adds new camshaft phasers and guides by default is pricing beyond GM's procedure. Extra parts can be justified on a very high-mileage engine, but the owner should make that call.

What 5,003 NHTSA complaints can and cannot tell you

The NHTSA complaint set behind this article holds 5,003 reports on 2009 to 2022 Traverses, 1,042 of them under ENGINE. The four bulletin years supply 547 of those, or 52%.

Model yearsENGINE reportsAverage a yearDetail
2009 to 2012547about 1372011 peaks at 204, about 34% of that year's complaints
2013 to 2017255about 512014 stands out at 117
2018 to 2022240about 4823% of the ENGINE reports

Across 2009 through 2017, the whole LLT run, the count is 802, or 77%. None of this counts failed chains. NHTSA sorts complaints by system, not part, so ENGINE sweeps in every engine fault from oil leaks to stalls, each one an unverified owner account. Read the numbers as an upper bound and a pattern, never a failure rate.

Recall, coverage, bulletin or goodwill: who pays

NHTSA's recall database was searched year by year for 2009 through 2022 Traverses. No campaign names the chain, its tensioner or its guides, and the engine-bay recalls that exist, a 2020 fuel pump campaign among them, are unrelated. In the record read here, GM handled chain wear with a reflash, a coverage adjustment and a bulletin, never a recall.

TypeWhat it paysWhere the Traverse chain stands
Safety recallThe repair at a dealer, within the federal rule's limitsNo campaign names the chain
Special coverageGM pays within a set age and mileage11340C has expired
Service bulletinNothing outside warranty; it gives steps and hours12-06-01-009E covers 2009 to 2012
GoodwillGM and dealer discretion, usually near warranty's endWorth asking, never assured

Many Traverse years have recalls on unrelated systems, seat belts and air bags among them. NHTSA's recall lookup costs nothing and lists any still open on a VIN. Dealers repair recalls at no charge only within the federal rule's limits, so confirm an old campaign.

The 2009 special coverage has ended, but it leaves clues

GM issued Special Coverage Adjustment 11340C in November 2012, the only program found that paid for a Traverse chain outside the standard warranty. It reached certain 2009 Traverses with the LLT, plus the Enclave, Acadia and Outlook of the same year and some older Cadillac models. Protection lasted a decade or 120,000 miles from the day a vehicle first entered service, whoever owned it.

Every 2009 Traverse is well past that line, so the program pays nothing now. It shows GM acknowledged the condition, and it means a 2009 car may already have a dealer-installed chain, which service records can confirm. One oddity: 50 ENGINE complaints for 2009 against 178 for 2010. Whether the coverage or a short first year on sale is behind the difference, the data cannot settle.

Outside the bulletin: 2013 to 2017 and 2018 onward

The 2013 to 2017 Traverses share the LLT but fall outside the bulletin's model list, which stops at 2012. Their ENGINE record is quieter, though 2014 is the exception at 117 reports, nearer the bulletin years than its neighbors. GM's documents never say the chain design or oil-life calibration changed after the list ended, so a car without oil-change records warrants the same caution.

From 2018 the LFY engine arrives, and no GM chain bulletin or special coverage was found for it. The 2018 to 2022 cars average about 48 ENGINE complaints a year against about 137 for the bulletin years. That proves nothing about any single chain; it only shows the earlier pattern is missing. RepairPal's pages describe this generation, so they are the closer benchmark.

Checks before you approve the repair or buy the car

  1. Scan for stored codes and keep the printout; they decide whether GM's kit applies.
  2. Confirm the engine by VIN: LLT through 2017, LFY on most 2018 and newer cars.
  3. Ask whether the quote goes beyond GM's kit with phasers, guides or sprockets.
  4. Compare labor with 9.5 hours for front-wheel drive or 9.7 for all-wheel drive.
  5. Have the dealer confirm the oil life monitor carries GM's latest calibration.

When buying, treat the chain as an open cost. On a 2009 to 2012 car, request records proving an earlier chain replacement, or take the job's cost off your offer. On a 2013 to 2017 car, oil-change receipts say more than a clean dashboard. Add the test no document replaces: a cold start after the car sat overnight, listening for rattle in the first seconds, plus a pre-purchase inspection. A yourvinhistory report lists factory specs, open recalls, accident and title records and odometer readings, but not the receipts.

Where this information comes from

Sources and photos: Facts checked against the sources above in October 2026. Photo by Victor Hughes on Unsplash; diagrams by YourVINHistory.

Keep reading

Frequently asked questions

What does a Chevy Traverse timing chain replacement cost?

RepairPal prices a 2019 chain and gear set at $2,701 to $3,541, but its pages describe the newer generation. On a 2009 to 2012 car, GM books 9.5 hours for front-wheel drive and 9.7 for all-wheel drive, so ask the shop to itemize hours, rate, kit and fluids on separate lines. No single figure fits every Traverse.

Which Chevy Traverse years have timing chain problems?

GM's chain bulletin names the 2009 to 2012 Traverse with the 3.6L LLT, and the 2009 special coverage reached certain cars from the first of those years. The four years account for 52% of ENGINE complaints on record. The LLT stayed through 2017 with fewer reports, led by 117 for the 2014 model.

Does a recall or extended warranty cover the Traverse timing chain?

No recall names the chain in any model year from 2009 through 2022. Special coverage 11340C, for certain 2009 cars, lasted a decade or 120,000 miles and has expired. The regular powertrain warranty of 5 years or 100,000 miles is the usual route after that, so a newer car may still qualify; a warranty check by VIN will say.

How do I know if a Traverse timing chain is worn?

GM ties the condition to a lit Service Engine Soon lamp plus stored codes P0008, P0009 and P0016 through P0019, which flag a camshaft and crankshaft position mismatch. A scan is the sensible first step, since GM uses those codes to decide when its kit applies. Buyers also listen for rattle just after a cold start.

How long does a replacement timing chain last on a Traverse?

The paperwork read for this article gives no mileage figure for a replacement chain. What GM does state is the cause: wear tied to oil change intervals and oil age. So the oil schedule and a current oil life monitor calibration are the practical protections; ask the dealer to document the calibration.

Now check the car itself

The guide explains what to look for. The report shows what this VIN has on record.

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.